Mud-club

Vehicle & Technical => Suzuki => Topic started by: snowz patrol on March 19, 2008, 21:08:07

Title: advise and info needed
Post by: snowz patrol on March 19, 2008, 21:08:07

Hi

I am looking for an su carb for my sj410 and finding it pretty hard to get one secondhand.
I have been told that a mini 1275 su carb is the same, i was also told it was a 1 3/4" HIF44 is this also correct????

Anyone help me out with some info or even got an odd one kicking about they wanna sell?????

Thanks

Richard

Title: Re: advise and info needed
Post by: jiblet on March 19, 2008, 21:21:33

have you checked ebay?  i think theres quite a few.. one sec

Title: Re: advise and info needed
Post by: jiblet on March 19, 2008, 21:24:00

http://cgi.ebay.co.uk/SUZUKI-SJ-NEW-SU-CARB-SET-UP-FOR-410-ENGINE_W0QQitemZ330201178692QQihZ014QQcategoryZ10426QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem




ive seen used go on there for like..120 so thats not to bad

Title: Re: advise and info needed
Post by: snowz patrol on March 19, 2008, 22:03:15

yeh i have seen this 1 b4 but i wanna know if this  is the same carb as on a min wiv that 1 3/4" HIFf44 number! I wanna look 4 a secondhand 1 cheaper

thanks

Richard

Title: Re: advise and info needed
Post by: baz2236 on March 19, 2008, 22:58:13

I maybe wrong but I thought the 1.75 inch HIFF 44 were for the 1300 SJ engine and the HIFF 38 was for the 1 litre engine So you proberly need one from a 1 litre metro or mini might be easier to get one of them.

Title: Re: advise and info needed
Post by: basher,tong on March 19, 2008, 23:41:42

hif 38 is the one you need. and i binned one at the weekend :doh: sorry!
hif 44 is best for the 1.3. hif 38 is just the right choke size for the 1.0

Title: Re: advise and info needed
Post by: snowz patrol on March 20, 2008, 10:17:43

Thanks for the quick reply and info i will keep looking around now i know which one to look for

Thanks

Richard

Title: Re: advise and info needed
Post by: fuddy-mukker on March 27, 2008, 19:19:13

Hi Rich,

If you bear with me for i min i will make a phone call and see if i can find out a price for one as i know a guy who is breaking a few, hopefully i will be able to help.

Cheers

Chris

Title: Re: advise and info needed
Post by: snowz patrol on March 27, 2008, 21:22:22

cheers been offered one but for a 1275 but need an adapter plate then tho so see what else i can find