Mud-club
Vehicle & Technical => Defender => Topic started by: mud-club-matty on December 23, 2007, 20:51:27
-
put my winch and bumper on lastnite what do you lot think? just got to wire it up now :D
-
Brilliant Matt, certainly coming on now mate!
Good work. 8)
-
Looking good, that a neat installation 8)
-
cheers im not sure were to put the solinoid pack under the bonnet of try and put it in the cab some were? any ideas?
matty
-
get a wirless remote there so much easier and more quickly at hand in close spots .
-
its the actual main pack i need to mount somewere cuz it dont fit on front with my spot lights on so i dont no were to put it?
-
Pop it under the bonnett Matt, fit and internal switch, I use the remotes also great for if your on your own, but one day the battery will go so good to have another option :idea:
-
cheers im not sure were to put the solinoid pack under the bonnet of try and put it in the cab some were? any ideas?
Dont bother with it.
Fit a contactor in the engine compartment instead then fit switches inside the cab (and in the grill if your cool) to operate the winch.
No wasting time with remote cables
8)
-
You'll be needed that winch matty as you always get STUCK EVERYWHERE! :lol:
-
You'll be needed that winch matty as you always get STUCK EVERYWHERE! :lol:
so true :lol: :lol: :lol: :lol: :lol:
-
rekon u need light guards on there now . save the lights if the cables snaps or stone chips
-
rekon u need light guards on there now . save the lights if the cables snaps or stone chips
ROFLOL!! a light guard will not protect the lights if the winch cable snaps!!!
-
rekon u need light guards on there now . save the lights if the cables snaps or stone chips
ROFLOL!! a light guard will not protect the lights if the winch cable snaps!!!
alrite maybe something a bit more beefer . go of what mel wants for her defender
-
as for painting it black
id have it with
java black paint
s/s headlight grills
sparayed s\s steel a - bar
d44 light bar in s/s steel with round chrome spots
matching paint work for the tubular wing cage thing
-
d44 light bar in s/s steel
D44 dont make light bars for Defenders
:)
-
start then like the disco ones . must be the mailorder4x4 fake front rollcage black edition one i was thinking off think its
-
:lol: :lol: :lol:
-
The thing a lot of people don't consider is "what happens if the line snaps?"
I've seen a berthing cable on a Type 42 Destroyer snap, it buried itself 8 inches into the armour plating of the gun turret :shock:
I've also seen a similar cable snap on a Leander class Frigate! It took a head off cleanly!! and still buried itself into steel plate!
Believe me, if a winch cable snaps and is not arrested in some way, the least thing you will worry about is "Lamp guards"!!!
-
ok then replace it with plamsa line then if thats better
-
ok then replace it with plamsa line then if thats better
no
plasma is great if you know how to use it,
if you dont it would be the most expensive purchase to get ruined,
no disrespect to either of you but id advise wire to any one new to the winching game
-
ok then replace it with plamsa line then if thats better
no
plasma is great if you know how to use it,
if you dont it would be the most expensive purchase to get ruined,
no disrespect to either of you but id advise wire to any one new to the winching game
people think you can stick plasma on and its job done
oh no
its a steep learning curve :wink:
and, they need looking after, as neglect will destroy it in a matter of months
i agree with what mike says, its not for a 1st time user
dan
-
we had no problem with the wire on our defender put plasma on it and it snaped first time!
-
I am in the process of fitting a winch in the new year with steel cable. I am new to winching so i have got a steel cable to [!Expletive Deleted!] about with before i even think about plasma . My question is if i fit a winching sail blanket thingy to the wire , where abouts do i put it i.e. near the winch in the middle or near the winch hook. Or could any body share any exsperience on where to buy one from or even better what to make one with.
-
I am in the process of fitting a winch in the new year with steel cable. I am new to winching so i have got a steel cable to !Expletive Deleted! about with before i even think about plasma . My question is if i fit a winching sail blanket thingy to the wire , where abouts do i put it i.e. near the winch in the middle or near the winch hook. Or could any body share any exsperience on where to buy one from or even better what to make one with.
i use an ARB orange one bought from D44
it slides up & down the rope
if im winching out a section over a road i have it int he middle to warn others that there is a live rope there, any other time i try to have it at the hook end but its 6 n 1/2 dozen its where abouts
-
ive got two on my cable, got a big chaff guard that spends most of its time at the hook
then ive got the heavy pvc arb sail that mike mentiond
regs state that when crossing a path you must have the sail there to mark the tort line
but when not my sail is usually 2/3rd the cable length from the winch
dan how did it snap and where abouts ?
you got a picture of the broken halfs ?
dan
-
getting there matty :D
stone guards are good for the lamps as well if you're chucking ropes / shackles around near the front of the vehicle.
plasma is safer but as mentioned you need to look after it a bit more than steel rope!
(he says with his wrapped round the lamps for months cos the remote for the winch has broken :roll: )
-
buy a proper winch :lol: