Mud-club
Vehicle & Technical => Mitsubishi => Topic started by: ezz on December 22, 2007, 23:04:40
-
been trying to get a locker for my 2000 L200,
No one makes one,
The diff is 25 spline 7.25" ring gaer, ARB do a 28 spline 8" gear.
i've been told that a older pajero front axle is 28 sline and would fit my truck,
does anybody know if this is true.. :?
-
yes....
I'm in the same situation as you, but with a delica
you need the axle and the O/S/F drive shaft
make sure you get the correct ratio and double check the diff size, there are 2 sizes and only about 20mm difference in the length, thats how you check them.
I am looking for a 28 spline 4.875 ratio diff, so iff you find one please tell me...
I need a front one to match this...
(http://i7.photobucket.com/albums/y299/strangerover/Delica/ARB%20Lockers/PC190300.jpg)
which is installed in this
(http://i7.photobucket.com/albums/y299/strangerover/Delica/Nov07-edited.jpg)
-
well seen as we are on about ARB's that ANTI ROLL BAR IS HUGE!
cant do it any favours off road.
-
i think that the early paj and challengers had a 28 spline..
it's just finding one :(
-
i think that the early paj and challengers had a 28 spline..
it's just finding one :(
all the 4.9 ratio diffs I have found have been the 28 spline ratio,
(2.8TD Auto series II Paj)
what ratio is the L200 ?
-
4.875,
the ratios are easy changed, just swap the ring and pinion gears over
not sure if yours or my ring and pinions will fit on a 28 spline diff though.
-
Dunno if this is any help, but worth a try: http://www.4wdsystems.com.au/html/lokka.htm
Nick ;)