Mud-club
Vehicle & Technical => Defender => Topic started by: 4x4spud on December 09, 2007, 21:05:18
-
if i want to change a turbo on a defender td5 whats involved
do i have to touch the ecu at all
-
If it's the same as a Td5 Disco (which I believe it is - somebody will tell me if I'm wrong) then it's 3 nuts to remove the downpipe and then another 3 off the manifold. You'll have to remove the heatshield and actuator as well.
Not a big job, but the bolts can be tricky to get to.
As far as I know there is no need to do anything with the ECU.
-
No need to touch the ECU, just make sure you follow the change procedure for the oil feed, otherwise it wont last long!
-
what is the procedure for the oil pipe please thanks
-
Probably the same as the 300tdi, you need to prime the feed pipe with oil and make sure there is oil at the turbo before firing up.