Mud-club

Vehicle & Technical => Defender => Topic started by: spinkster on September 20, 2007, 09:41:10

Title: will these fit..........
Post by: spinkster on September 20, 2007, 09:41:10
as a straight swop for the hubs on my 1988 110 with drum brakes?

http://cgi.ebay.co.uk/landrover-complete-rear-hubs-with-disks-calipers-pads_W0QQitemZ130152354635QQihZ003QQcategoryZ31348QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Title: will these fit..........
Post by: martha focker on September 20, 2007, 10:40:07
i would say so but see what the rest say first :D
Title: will these fit..........
Post by: Xtremeteam on September 20, 2007, 11:27:39
aslong as they come with the caliper mounting brackets

you may need different 1/2 shafts but in not 100% sure
Title: will these fit..........
Post by: L90OOK on September 20, 2007, 13:05:05
You may have to get different stub axles as there are a few variants.
if they are the earlier type you should be ok.
May also have to change drive shaft but they are cheap enough.
Title: will these fit..........
Post by: Guardian. on September 20, 2007, 13:24:33
could just change the whole axle for disc type, they dont make much more than that usually on ebay.
Title: will these fit..........
Post by: muck_truck on September 20, 2007, 16:23:48
most ptobably wont fit as yor axle tube wont have the calliper mounts.

i bought a disco rear axle and was going to keep my 90 axle tube but the mounts for the calliper are cast on the axle tube.

Wont you have a sailsbury rear axle ?  wouldnt the hubs be different to rover ones
Title: will these fit..........
Post by: iomlr on September 20, 2007, 16:48:23
Quote from: "muck_truck"
most ptobably wont fit as yor axle tube wont have the calliper mounts.

i bought a disco rear axle and was going to keep my 90 axle tube but the mounts for the calliper are cast on the axle tube.

Wont you have a sailsbury rear axle ?  wouldnt the hubs be different to rover ones


correct wont fit! need a rrc or a disco or a landrover rear axel that has had discs before!
Title: will these fit..........
Post by: spinkster on September 20, 2007, 18:15:39
ah i wont bother bidding then.........i was just browsing and they looked cheap enough if they'd fit..................so what exactly do i need to change my salisbury to disc braked?
Title: will these fit..........
Post by: Xtremeteam on September 20, 2007, 20:05:42
Quote from: "iomlr"
Quote from: "muck_truck"
most ptobably wont fit as yor axle tube wont have the calliper mounts.

i bought a disco rear axle and was going to keep my 90 axle tube but the mounts for the calliper are cast on the axle tube.

Wont you have a sailsbury rear axle ?  wouldnt the hubs be different to rover ones


correct wont fit! need a rrc or a disco or a landrover rear axel that has had discs before!


incorrect

the caliper mounts bolt onto the mounting ring that the stub axle bolts onto

BTDT converted my dads truck to discs
Title: will these fit..........
Post by: muck_truck on September 21, 2007, 11:13:31
Quote from: "Xtremeteam"


incorrect

the caliper mounts bolt onto the mounting ring that the stub axle bolts onto

BTDT converted my dads truck to discs


are you talking about sailsbury or rover axle?  cause im prety sure that the the caliper mounts where part of the tube cast on the disco (rover) axle i bought.

Sailbury has a bolt on mount for a caliper.
Title: will these fit..........
Post by: Xtremeteam on September 21, 2007, 13:58:53
your talking about a standard axle,
im talking about a salsbury which will be fitted to his 110,

on a 110 its all bolt on bits
SimplePortal 2.3.5 © 2008-2012, SimplePortal