Mud-club

Vehicle & Technical => Discovery => Topic started by: sub4x4 on September 02, 2007, 14:53:03

Title: 300 tdi es
Post by: sub4x4 on September 02, 2007, 14:53:03

hi guys can any body tell me if the wireing is in for the heated seats and if so can i just get the switches and plug n play

Title: 300 tdi es
Post by: sub4x4 on September 02, 2007, 14:56:18

just found some cabling behind the lights well its got a plug on it . could this be for the adjustable head lights and if so were dose the motor sit ?

Title: 300 tdi es
Post by: sub4x4 on September 02, 2007, 15:12:16

how easy is it to remove the six disk changer from under the drivers seat ? :idea:

Title: 300 tdi es
Post by: muddyjames on September 02, 2007, 21:41:45

Quote from: "sub4x4"

how easy is it to remove the six disk changer from under the drivers seat ? :idea:

if it is under the passenger seat, dead easy, if it is the slightly later mid 95's onwards then a bit trickier but still doable with basic tools.

I know you put drivers seat but thought I would add comment about passenger seat coz I am tired and this paragraph covers me own back :lol:

Title: 300 tdi es
Post by: karlo on September 03, 2007, 17:55:34

Quote from: "sub4x4"

just found some cabling behind the lights well its got a plug on it . could this be for the adjustable head lights and if so were dose the motor sit ?

http://www.ownerinfo.landrover.com/extfree2viewlrprod/index.jsp

Discovery> Accessory Fitting Instructions> Continue> Head Lamp Levelling Kit.