Mud-club

Vehicle & Technical => Defender => Topic started by: adafish on August 02, 2007, 16:38:20

Title: big nut
Post by: adafish on August 02, 2007, 16:38:20

just taken off front prop, and need to undo the nut that come out off the transfer box....whats the best way...

Title: big nut
Post by: wing nut on August 02, 2007, 16:53:12

32mm socket if memory serves me

Title: big nut
Post by: adafish on August 02, 2007, 16:57:12

its a 30mm, but i'm worried that when trying to undo it, i'll do the box in......i'm hanging off the bloody thing...

Title: big nut
Post by: V8MoneyPit on August 02, 2007, 17:02:58

I suspect the drive loads applied are far greater than you will apply with a breaker bar.

Title: big nut
Post by: wing nut on August 02, 2007, 17:24:35

its a big difference to mine ..mine fell off :?

id go breaker bar and some grief :wink:

Title: big nut
Post by: adafish on August 02, 2007, 18:00:45

SORTED    cheers...

Title: big nut
Post by: Porny on August 03, 2007, 14:05:51

Ada...

You're just a wimp  :wink:

Get Mason to do it for you (or one of your daughters).....



Ian

Title: big nut
Post by: adafish on August 04, 2007, 18:08:39

NELSON.....ya pratt......its MASON.. :lol:

Title: big nut
Post by: Porny on August 06, 2007, 06:41:07

Quote from: "ada110crew"

NELSON.....ya pratt......its MASON.. :lol:

Eh???  Don't know what your on about.... why would I write nelson???  :wink:

Title: big nut
Post by: Les Henson on August 06, 2007, 08:34:09

I did one of these last Saturday. I had to put a jack under the breaker bar to crack the nut. The loading on it created by normal drive will be far greater than this.


Les.