Mud-club
Vehicle & Technical => Range Rover => Topic started by: Reggieroo on July 17, 2007, 13:23:23
-
Can anyone tell me what size the hub nut is on the back axle of a RRC as I need to change the rear brake discs & pads.
It looks to me like its a 52mm but don't want to go & buy the wrong socket.
-
52mm is stuck in my mind for some reason :)
-
Yes it is 52mm.
The problem with a socket is that it probably won't be deep enough. They are also pretty expensive in large sizes.
Your best bet is to get hold of a hub nut socket. Probably the nearest place to you will be Douglass Motors in Wolston, link in my sig, they usually have them in stock.
-
Yes it is 52mm.
The problem with a socket is that it probably won't be deep enough. They are also pretty expensive in large sizes.
Your best bet is to get hold of a hub nut socket. Probably the nearest place to you will be Douglass Motors in Wolston, link in my sig, they usually have them in stock.
Thanks a lot buddy..............just gave them a call at Wolston Motors & they have one in stock £7.50 so I'm off down there to pick it up.
-
yer use a hub nut socket...bout £4-5 from the cheaper suppliers but well worth it (even at £7 :P )