Mud-club

Vehicle & Technical => Discovery => Topic started by: Disco-Ron on July 06, 2007, 23:20:21

Title: How hard is it to.....
Post by: Disco-Ron on July 06, 2007, 23:20:21

Change the front output shaft seal on a 200tdi transfer box.... mine dribbling!!

Title: How hard is it to.....
Post by: stageonesimmo on July 07, 2007, 00:01:27

Not too bad - better with a rattle-gun for the flange nut, but that just needs a breaker bar, then it's flange off, seal out, seal in, flange back on, prop on, job done........

Title: How hard is it to.....
Post by: Disco-Ron on July 07, 2007, 00:11:12

I thought it wouldn't be too bad, any idea what size the nut is?? i may need to buy the socket!!

Title: How hard is it to.....
Post by: Dr Neil on July 07, 2007, 22:20:59

If it's the same size as the rear i think you'll find it is 30mm

Neil....

Title: How hard is it to.....
Post by: Disco-Ron on July 08, 2007, 22:22:34

Thanks Neil..... i have a 30mm socket already!!