Mud-club
Chat & Social => The Bar - General Chat => Topic started by: Dave_ on June 20, 2007, 14:35:17
-
i originally posted this in the range rover section, but i thought it would get more looks in here?!
found 1 on here http://www.all4wheelsgear.com/page15.html
good value or cheap for a reason???
thanks again
Dave_
-
i got one for my defender from all4wheels as they are my local shop,really good looking and solid bar,can put all my weight on on and doesnt move a bit.so good value!
-
getting some pressies for it are ya ?
not seen you about since going green laneing :?
-
blokey at work is selling me his old bull bars with lights, so i thought id complete the set by adding some roof lights!!! :D
and i saw u last week Tiki, but you looked quite miserable! :P
-
well if i was in the bin lorry thats understandable ( it smells awfull ) if not i must have been singing along to my stereo, if you'd heard my singing you'd be miserable too !! :lol:
-
ok so i have the light bar it looks like its supposed to sit in the gutter around the roof am i right? and does anyone have any tips on fitting?
-
We got ours from there. Very good and neat.
-
ok so i have the light bar it looks like its supposed to sit in the gutter around the roof am i right? and does anyone have any tips on fitting?
Get someone to help you :wink:
I did it by myself cause my other half couldnt reach the roof :lol: ots of scratches :cry:
Mine fits in the gutter and you drill down through the gutter, with the door open :wink:
Steve
-
def make sure you have the door open when you drill!
-
Don't you guys find that it illuminates the bonnet? I found the glare from the bonnet outweighed any lighting advantage.
I took it off and built my own which sits further back on the roof. That way, a shadow is thrown on the bonnet and the lights do what they are meant for.
-
Don't you guys find that it illuminates the bonnet? I found the glare from the bonnet outweighed any lighting advantage.
I took it off and built my own which sits further back on the roof. That way, a shadow is thrown on the bonnet and the lights do what they are meant for.
that does look pretty neat, fancy making me 1 :D
-
Don't you guys find that it illuminates the bonnet? I found the glare from the bonnet outweighed any lighting advantage.
I took it off and built my own which sits further back on the roof. That way, a shadow is thrown on the bonnet and the lights do what they are meant for.
that does look pretty neat, fancy making me 1 :D
Easy Greg, get your self a roof bar and set it back like he say and mount some cibbies on :P
-
that does look pretty neat, fancy making me 1 :D
It's just a piece of steel tube with sheet brackets for the ends and lamps. The little lamps are a Wipac product. They may be small but they kick out some light and avoid too much frontal area..... a 110 is like a breeze block before you start adding bits :lol: The main advantage of these lamps have side mounts. So you can chuck the brackets that come with them and just use plates either side welded to the bar. And because they are light (weight!) the sheet can be something like 18swg. Nothing too substantial.
Obviously, you have to drill the roof if you do it the same way as I did.
The trouble with the gutter mount ones you can buy, is that they cannot be set back. You have to fit them in front of the roof.
-
I made mine from a piece of electrical conduit found in a skip at work it had two bends in it going in opposite ways so I cut the pipe in the middle shortened it to the width of the gutters and welded it back together then added four brakets for the lights and four L brakets with self tapers to hook under the gutters it's been on for 2 years now with no problems apart from smashing one of the lights at the mayday mudfest :cry: