Mud-club

Vehicle & Technical => Range Rover => Topic started by: blackbob on March 16, 2007, 20:24:24

Title: wheels
Post by: blackbob on March 16, 2007, 20:24:24

will a k reg rangie wheel fit an f reg rangie cos the wifes rangie has better tyres than mine and its going to be off the road for a while and i dont want to weare mine out for road use as there mud tyres and hers are at tyres and be nice to just swap wheels :lol:  :lol:

Title: wheels
Post by: hairyasswelder on March 16, 2007, 20:52:46

All classic RR wheels are on the same stud pattern and disco 1 alloys too.
Dont see why they wouldnt fit unless the tyres are larger :wink:
Steve

Title: wheels
Post by: Range Rover Blues on March 17, 2007, 01:49:36

Like Steve said, the ONLY problem you get is trying to fit alloys to earlier cars that had steel Rostyles, and they can be fitted with a little grinding, or possibly removing the spring washers from the halfshaft bolts and using threadlock.

other than that all Disco 200/300 and RRC alloyes are the same size and very similar offset, so you can mix and match.

Title: wheels
Post by: Bobtail on March 25, 2007, 02:49:31

Quote from: "Range Rover Blues"

Like Steve said, the ONLY problem you get is trying to fit alloys to earlier cars that had steel Rostyles, and they can be fitted with a little grinding, or possibly removing the spring washers from the halfshaft bolts and using threadlock.

other than that all Disco 200/300 and RRC alloyes are the same size and very similar offset, so you can mix and match.

But be carefull with RRC three spokes as they do

A tuded and tubeless version  :shock:

I know from experience :cry:  :?

Title: wheels
Post by: Range Rover Blues on March 30, 2007, 01:35:33

Never seen those, you live and learn :)

Out of interest can you tell any difference?