Mud-club

Vehicle & Technical => Range Rover => Topic started by: simon15 on March 11, 2007, 18:03:02

Title: What clutch in a RRC with 2.8 Izusu
Post by: simon15 on March 11, 2007, 18:03:02

Clutch was slipping quite bad while out laning today so just wondering what clutch i will need?

i have a RRC with a 2.8 TD Izusu engine mated to a Rangie box..


Any ideas on what clutch i will need and a decent clutch to get?

Title: What clutch in a RRC with 2.8 Izusu
Post by: hairyasswelder on March 11, 2007, 20:23:16

You not having much luck  :shock:  :shock:
If it a Rangie g/box I would say it a Rangie clutch plate to match the spigot, The Isuzu flywheel should be modified to take said clutch and keep starter ring gear

Best to strip and measure it if the conversion used is unknown

Not much help  :?

Steve

Title: What clutch in a RRC with 2.8 Izusu
Post by: simon15 on March 11, 2007, 20:25:50

yeah it aint good, but i was trying to pull away on a big hill with  a dodgy clutch anyway.


oops i just ordered a isuzu clutch!!!!!

only £39 though so can always sell it on if not.


would i need a TDI Rangie/disco clutch or V8 or something else.


i want to get it before it gets stripped so it can all be done in one go.


ill buy a Rangie clutch too then see which one would fit...  :lol:

Title: What clutch in a RRC with 2.8 Izusu
Post by: hairyasswelder on March 11, 2007, 23:38:41

What gearbox has it got? What was the original engine?

Prob best to strip first and compare in parts shop.

£39 ?? is that just the plate?? and can you not return it?

Steve

Title: What clutch in a RRC with 2.8 Izusu
Post by: simon15 on March 12, 2007, 07:33:41

its running a rabge rover box. and the engine is out of a isuzu trooper.


39 quid is for a complete clutch kit inc delivery...... bargain.