Mud-club
Vehicle & Technical => Discovery => Topic started by: Andy. on November 12, 2004, 17:42:53
-
I've got some Good Years MTR's fitted 225/75's what pressure should they be :?:
There is a reading on the side wall of each tyre, is this the correct running pressure :?:
Cheers.
-
The reading on the sidewall is normally the maximum pressure.
Start with the recommended pressures for the vehicle.
A good test for your vehicle is to draw a thick line across each tyre in chalk, then drive down the road a couple of hundred metres. (on a dry day)
You should see fairly quickly if they are over or under-inflated by how the chalk wears off. It should wear evenly across the tread ideally.
-
Cheers Tim, will check out manual tonight.
Nice tip too, will have to try that one :wink: