Mud-club
Vehicle & Technical => Suzuki => Topic started by: Oz on February 06, 2007, 03:49:31
-
Hi guys i got my hands on a weber carb gaskets the lot but no instructions on what pipes go where...This is for samarui.. has any one got a PDF of the manual or may be able to make one for me?
-
Which model Weber is it? :)
-
no completly sure it looks like the Weber 32/36 DGAV Carburetor
-
I had a Weber 32/34 DMTL on my SJ413 - very simple to hook up. :)
Try these links :)
http://www.racetep.com/weberX.html
http://webernorthamerica.com/pdffiles/32_36DGAVEV.pdf
-
cheers i got it on there but i got a lot of breather tubes from the engine for the old carb that dont go any where.. and it revs up to like 3000rpm then dies ...any idea
-
Systematically go round all the little breathers and block them up - that might sort it.
IIRC all these breathers were blocked on my 413 - including the big one between the carb and the rocker cover that's mounted on the inlet manifold :)
-
ok mate sounds like a plan one catch is i have one breather that is coming of the carb where do that go
-
might be the advance/retard, if so it goes to the distributor :)
Post up some pictures, I'm sure someone on here knows about these things :)
-
cheers mate ill gve it a go and see what happens