Mud-club
Vehicle & Technical => Discovery => Topic started by: 90Mike on January 27, 2007, 17:36:26
-
Hi there does anybody know the actual length of a extended metal brake hose from end to end needed for a 2" lift and do all 4 on a disco need to be changed.
thanks
-
lots of disco have twin lines to the front calipers...meanign you need 5 as the rear only has one...the axle has a solid brake pipe that runs along the top of it.
so you either ned 3 or 5 :wink:
-
You must have an ABS set up then if you have 4 lines.
1 each side at the front a 2 at the back ??
Goodridge lines for a +2" lift are 18.5" from the end of the fittings.
Hope that helps.
-
hi there thanks for the reply :) i was just about to say i had a quick look and i think mine is a little bit different maybe because it has got abs but it looks like bullfrog beat me to it :) so thanks to both of you for your help much is appreciated. :)
-
www.llama4x4.co.uk
Top quality fast service and cheap too, he may know the length
-
Thats where I get mine. I just have a goodridge set kicking about.
Nowhere near the quality of LLAMA lines. 8)
Give David a buzz and tell him what suspension you are getting or what you are doing and he will sort you out.