Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: Big Rich on November 21, 2006, 16:49:41

Title: Series 2 Wiper wash problem
Post by: Big Rich on November 21, 2006, 16:49:41

The switch works for the wiper blades okay but when you try to wash it blows the fuse. Not sure which part of the switch is ment to go to the washer pump.

Any ideas?

Rich

Title: Series 2 Wiper wash problem
Post by: ian_s on November 21, 2006, 16:54:19

that sounds like theres a short on the green and black cable(i think) that goes to the washer motor, or the motor itself is seized

get an ampmeter and put it across the fuse terminals and see what current gets drawn as you press the button.
the try it with the motor disconnected, and see if its any different.