Mud-club

Vehicle & Technical => Suzuki => Topic started by: V8MoneyPit on August 17, 2006, 18:10:19

Title: Been playing amateur fabricator again...
Post by: V8MoneyPit on August 17, 2006, 18:10:19

Made a filter box to use a K&N cone type filter with a stub to take a flexy joint to the B&Q drainpipe (!) snorkel. The flexy joint is a cut down Morris Minor steering rack boot  :D

Title: Been playing amateur fabricator again...
Post by: Brian the Sn@il on August 17, 2006, 18:21:20

Looking good there Steve :)

Just prooves it doesent have to cost a fortune to sort out your own Mods, more rewarding also.

Title: Been playing amateur fabricator again...
Post by: Jake on August 17, 2006, 19:36:43

Nice work.
 8)

Title: Been playing amateur fabricator again...
Post by: Damon on August 18, 2006, 23:02:34

Very smart Steve, and yes, very satisfying to make your own stuff  :)

Title: Been playing amateur fabricator again...
Post by: P.R.Howler on August 20, 2006, 13:40:02

Looks good that

Title: Been playing amateur fabricator again...
Post by: fudge on August 20, 2006, 14:07:55

Amazing stuff that B&Q pipe..... Thats what I used too.... but it let water in the joints so I suggest you take it appart when happy with it and use silicone on the joints..... I am going to.

Progeny's pipe work leaked at Bures too...... in the end he borrowed some duct tape from me to seal his, mine was too dirty.

Title: Been playing amateur fabricator again...
Post by: V8MoneyPit on August 21, 2006, 12:39:32

My pipes are glued together on the loose joints. Some of the joints were so tight I couldn't get them apart again!

Title: Been playing amateur fabricator again...
Post by: littlepow on August 22, 2006, 10:05:20

That be a nice bit o' metal bashing.