Mud-club

Vehicle & Technical => Defender => Topic started by: blackbeltbob on July 31, 2006, 09:08:24

Title: bonnet release
Post by: blackbeltbob on July 31, 2006, 09:08:24

help,cant get the bonnet up on my defender.
have tried leaning on it while someone pulls the release lever which did not work. the lever moves 1/4 inch then is solid.
any ideas that dont involve crowbars or hammers?
it has chequer plate on the wing tops which may be pushing the bonnet up, not sure
 :?  :?  :?  :?

Title: bonnet release
Post by: defenderdan on July 31, 2006, 11:45:46

Take the grill off then you will be able to pull the lever by hand from underneath to get the bonnet open. The mechanism might just want a clean up and regrease.

Title: bonnet release
Post by: Eeyore on July 31, 2006, 12:06:45

Whilst it's open (using the above method or reaching in through the grill and yamping on the cable if you're fingers are thin enough) - check the bolts that hold the release mechanism to the slam panel (i.e where the bonnet fastens down). They could be loose, which can cause some problems.

Cheers
 8)
Eeyore

Title: bonnet release
Post by: blackbeltbob on July 31, 2006, 12:31:57

was hoping that this would not be the only way as it has an A bar and spots on.
but thanks anyway I will try this

Title: bonnet release
Post by: Berliner Beer on August 02, 2006, 10:08:53

Mine is a knightmare too. Saw J99mud have a little piece of wire which he pulled from between the grill and then tucked away. seemed like a good idea. My only worry does it make the defender more nickable? It takes 2 people to open my bonnet. A real Pain!

Title: bonnet release
Post by: dew1911 on August 02, 2006, 10:32:34

How do you mean? Does the lever inside the cab not even move or does it just not feel like it's connected to anything?

Incidentily mine pops up perfectly, hell of a clang to shut it again though.

Title: bonnet release
Post by: Berliner Beer on August 03, 2006, 09:17:03

You pull the lever, which is very stiff. It does give a bit. But the bonnet doen't pop up. You need a second person to wigggle the bonnet very hard to release it. A real pain in the ARS*

Title: bonnet release
Post by: dew1911 on August 03, 2006, 18:12:29

Would it be possible to trace the wire and see if it is sagged / frayed somewhere. or maybe give it all a good spray of WD-40.

Title: bonnet release
Post by: blackbeltbob on August 14, 2006, 13:17:31

just remembered that it needs an MOT this month as well so they can have a look at the bonnet while there.
also getting the steering and suspension bushes done as well with regards to my earlier topic of a banging defender.
BRING ON THE CLOG!!!!!!!!!!!!!! :D  :D  :D  :D

Title: bonnet release
Post by: denviks on August 14, 2006, 13:57:51

mines a pain to open too......its one of them nudge nudge wink bonnets....which you have to know how to open it..... i couldnt get it open a while back........had to do the above of stripping it all down. cleaned and greased i put it all back together to find it wouldnt open still  :?


so went to pull lever again and nothing but the lever stayed in the out position......i slamed the passenger door and the bonnet popped open  :lol: ..... so this is now my way of opening the bonnet  :lol:  :lol:  :lol:  :lol:


well it is a landie

Title: bonnet release
Post by: dew1911 on August 14, 2006, 14:00:26

Quote from: "denviks"

so went to pull lever again and nothing but the lever stayed in the out position......i slamed the passenger door and the bonnet popped open  :lol: ..... so this is now my way of opening the bonnet  :lol:  :lol:  :lol:  :lol:

:lol: :lol: Love it! Such a typical Land Rover bodge :lol:

Title: bonnet release
Post by: Xtremeteam on August 14, 2006, 22:35:40

Quote from: "blackbeltbob"

just remembered that it needs an MOT this month as well so they can have a look at the bonnet while there.
also getting the steering and suspension bushes done as well with regards to my earlier topic of a banging defender.
BRING ON THE CLOG!!!!!!!!!!!!!! :D  :D  :D  :D

uuo coming with our little group for the first trip round the site?

Title: bonnet release
Post by: blackbeltbob on August 15, 2006, 11:22:10

if I am feeling brave enough on the day.
not got a winch or lift kit yet but will try.
although you are bonkers so may steer clear of the daft stuff if you dont mind :D  :D  :D