Mud-club

Vehicle & Technical => Defender => Topic started by: wonderboy on July 02, 2006, 15:45:25

Title: Indicators dont work
Post by: wonderboy on July 02, 2006, 15:45:25

My indicators, both left and right dont work.  However the hazards do.  The light on the dash dosent light up even when the hazards are on.  Ive checked the fuse and the switch.  Any one have any idea why there seems to be a lack of power to the switch?

Title: Indicators dont work
Post by: Edge on July 02, 2006, 16:30:28

Could be a blown bulb in the dash & a faulty indicator stalk/switch???

Are you sure power is actually "NOT" reaching the stalk/switch??

Title: Indicators dont work
Post by: hobbit on July 02, 2006, 16:36:28

Try the indicator relay not sure on defenders but it may be an independant unit from the one for the hazards

Title: Indicators dont work
Post by: wonderboy on July 02, 2006, 17:18:00

Defently no power reaching the switch, as neither left or right work.  Dont know about the relay, any idea on which one it is, a guess is as good as any thing? There's 2  that ive not tried, but there the same and have tried to swap them over no joy.

Title: Indicators dont work
Post by: Xtremeteam on July 02, 2006, 17:28:10

have u changed the hazard switch yet?

try that & they should start working again

Title: Indicators dont work
Post by: wonderboy on July 02, 2006, 19:06:54

Cheers RedlineMike,  took the switch out, took it apart and bodged it back together.  Ive now got indicators but no hazards :roll: .  That can get sorted tommorow with a new switch. Ive just got to put the dash back together and remember where all the screws go. Wounder how many ill have left over? :?

Title: Indicators dont work
Post by: Xtremeteam on July 02, 2006, 19:17:00

why the dash apart? 2 screws for the hazard switch panel & 4 for the coloumn cowling