Mud-club
Vehicle & Technical => Defender => Topic started by: Sharpshooter on July 25, 2004, 12:00:25
-
I want to fit some new seats to my 110, but all the genuine ones are too expensive. What other seats are a good fit, or go straight in. I dont have long legs, so space isnt much of a problem. At the moment i have military squab type seats. Cheers. :D :lol:
-
yuo might not be up to this but . I would take advantage of all the boyracers in their poketrockets whoo slam in to trees and such .
go in to your local brakers and you should find an old corsa with bucket seats .
good luck :) :)
cheers
Rob
-
I dont think i have the right build for bucket seats, i think they would have to be barrell seats.
-
he he eh :lol: :lol: :lol:
Cheers
Rob
-
I fitted Metro seats in my 90,
Volvo seats also fit in with little modification. :wink:
-
I've got MK3 F**d fiesta seats in mine. It's amazing what you find dumped down the odd green lane!!
-
How much modification do they need.
-
I fitted a hinge to the front of the passenger seat
to allow access to the battery area.. I also had to
fit spacers to the rear of the seat base so the seat
was not tipping back too far..
-
Quite a bit. Had to remove the rear legs from the seats and then modify the seat box as well. I wouldn't have bothered to be honest but they were free. 8) That always makes the effort seem worth while. :lol:
-
Seats out of a citroen ZX apparently fit ok
-
I have fitted a pair of Disco seats in my 90, fit a treat, the only down side is the passanger seat needs to come out to get to the battery box, but thats only a 10 minute job, 4 13mm bolts. I got them at LRO Show last year 40 quid the pair.
-
ive got range rover seats in my 110 csw and is new realy comfy
-
What year Range Rover, and did they take any modding??? :D
-
thay wer from a 86 87 f plate and i took off the base from my 110 seats and welded the rangy ones on top evry one who as sat in the driveing seat including dave landy say it was very comfy and a nice driveing posistion ...... sam