Mud-club
Vehicle & Technical => Discovery => Topic started by: Andy. on July 10, 2004, 21:48:39
-
Found this today hanging down will parked up in P.A. Blanchard's car park :shock:
What's it for :?:
The is a spade connector on the wheel plate and the piece hanging down has a wire which has broken off from somewhere on it, does it connect on there?
Any clues?
-
Another pic................
You can just make out the spade connector just to the left of where you can see the brake pipes.
-
Looks like the brake pad wear indicator cable to me
-
or maybe something to do with the abs system if you have them
Kev
-
2nd vote, for the pad warning wiring.
-
Check the other side to see whats where
Kev
-
Andy,
It connects to the brake pads to tell you when they need changing.
Some replacment pads don't have the wires on for these to connect to.
-
Check the other side to see whats where
Kev
Nothing, they're only on one side....
-
BTW Andy,
The reason it's hanging down is because the retaining clip
that holds it in place has broken off, I can see it still attached
to the cable connector. :wink:
-
Cheers guys :wink:
Yep there is only one, the opposite side has'nt got one.
Not altogether sure if it works when connected, but now I know what it is aty least.
Cheers again :D