Mud-club

Vehicle & Technical => Mitsubishi => Topic started by: mitsi_kev on May 06, 2006, 21:44:07

Title: pi**ed up shogun mk1
Post by: mitsi_kev on May 06, 2006, 21:44:07

hi there peeps, any ideas.? my mk1 shogun 2.6 swb has a bit of a lean on, to the offside.
 shes sitting about 1.5-2 cm lower than the near side, ive checked the torsion bars and they are set evenly, im guessing that the offside rear spring is weak? will this cause the sag at the front to? :?

Title: pi**ed up shogun mk1
Post by: Richie_EB4 on May 07, 2006, 08:03:11

Quote

will this cause the sag at the front to?

Yes  :wink:

Title: pi**ed up shogun mk1
Post by: john cook on May 31, 2006, 18:32:03

just because the torsion bars appear level doesnt mean they are. the torsion levers are removable and on splines.

on level ground lift the rear of the vehicle with a jack under the rear differential housing.then check the front suspension heights

Title: pi**ed up shogun mk1
Post by: Tiny Tim on June 25, 2006, 12:35:54

As above

I had a Pro Comp spring sag suddenly and it made the whole car look lopsided.

Best springs I have found are Iron Man who also do HD torsion bars  8)