Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: bobmaf on April 16, 2006, 19:27:45
-
i have a rewired series 3 and none of the colured wires are right my fog is wired to me side lights and the reversing light is non existant
please help me
-
I didn't think Series 3's had a Reverse Light, but I'm known to be wrong a lot...
-
No ya right they dont. There is no switch on the gearbox but you can put one on the dash bro....
Have a look here rob if ya after help with the old beast....
http://www.fourfold.org/LR_FAQ/Series/Electrical.html
-
You can fit a switch to the gearbox if you want. basically when reverse is engaged presses down a little plunger on the switch turning on the light :D
Matt
-
Yeh but me bro is not that good when it comes to fabricating thing....trust me. He would use 2 pieces of tin foil and paper clips with some speaker wire and no fuse.....he he
-
Fair enough... :D
Cheers Matt
-
Reverse switch kits pop up on ebay every now and again.
LR Series I think..
-
No ya right they dont. There is no switch on the gearbox but you can put one on the dash bro....
l
Thought there was a place on the 'turret' for one on later S3's
There's been an article in one of the magazines showing one being fitted onto a factory installed bracket
-
its a tax exempt one so may be to old BTM
-
Here ya go:
http://www.lrsoc.demon.co.uk/
Although you only need to buy a brake light swirtch to make it yourself...