Mud-club

Vehicle & Technical => Suzuki => Topic started by: nero161 on April 01, 2006, 19:27:47

Title: help sj413 fitting su carb on friday
Post by: nero161 on April 01, 2006, 19:27:47: i will start by saying what a good site you have.
i am going to fit a su carb to my sj413 using a modified manifold. i have a home made snorkel fitted with a cone filter on top and was wondering what is the best needle to use in the carb and where do all the pipes go.

thanks

andy
Title: help sj413 fitting su carb on friday
Post by: Popeye on April 01, 2006, 22:22:53: The best needle I've been told is the "BDL" and as for the pipes you just need the fuel pipe and breather ,maybe the dizzy advance some people use it some not depends which SU you have. I'll try and find a link for you.
Title: help sj413 fitting su carb on friday
Post by: Popeye on April 01, 2006, 23:48:16: Here's the link it's a PDF file http://www.suzukitech.org/pdf/Information/su_carb_to_samurai_conversion.pdf it's a good site to browse around too
Title: help sj413 fitting su carb on friday
Post by: nero161 on April 02, 2006, 10:06:27: thanks thats great :D
Title: help sj413 fitting su carb on friday
Post by: Popeye on May 08, 2006, 17:37:17: How did you get on with the conversion nero161
Title: help sj413 fitting su carb on friday
Post by: nero161 on May 08, 2006, 18:37:38: super!!! it runs like a dream from the off.
had a problem with the blue sealer on the bottom cover getting into the jet but sussed it out and goes like a dream again.
Title: help sj413 fitting su carb on friday
Post by: Popeye on May 08, 2006, 20:29:44: I'm hoping to do mine when it stops raining long enough, have you any tips for me :wink:
Title: help sj413 fitting su carb on friday
Post by: nero161 on May 09, 2006, 09:45:37: i got a re-manufactured manifold off e-bay and it fits brilliant. removed the airfilter box and fitted a homemade snorkel with a k&n on top. pipes were easy to suss out. make sure you get the bracket for the throttle cable as you will need it and also put new gaskets on as mine leaked first time. i will put some pic in my album for you. if you need any more help just shout.
Title: help sj413 fitting su carb on friday
Post by: Popeye on May 09, 2006, 19:09:31: OK thanks I'll keep you posted :D
Title: help sj413 fitting su carb on friday
Post by: nero161 on May 09, 2006, 20:40:19: just put some pics in my sj folder for you to look at
Title: help sj413 fitting su carb on friday
Post by: generation-x on May 09, 2006, 20:49:26: nero wot su did u use and how did u fit the snorkle to the su outlet?

simon
Title: help sj413 fitting su carb on friday
Post by: nero161 on May 09, 2006, 20:58:18: the su is a hiff 44 and it fits to the snorkle via tha bracket that came with the k&n off the 1275 mini. and a bit of the flexi from the orignal air filter set up. i will take a close up of it and put it in my folder. 5 min
Title: help sj413 fitting su carb on friday
Post by: generation-x on May 10, 2006, 21:05:54: hi nero
so just to confirm it has 2 bolts that holds on the outlet pipe?
dose the new outlet have the are ways milled into it?

simon
Title: help sj413 fitting su carb on friday
Post by: nero161 on May 11, 2006, 09:24:32: yes only 2 bolts holding it on.
there are no other holes apart from the 2 holes for the bolts.
will put a close up of that part in folder for you
Title: help sj413 fitting su carb on friday
Post by: tommytonker on May 26, 2006, 12:32:03: Quote from: "nero161"
super!!! it runs like a dream from the off.
had a problem with the blue sealer on the bottom cover getting into the jet but sussed it out and goes like a dream again.

I am new to this site , and so far it has provided a wealth of information.
However I have a question. Some background, I have a SJ410 with a Holden Barina G13A 1326cc with an hif44 su carb on it.
First, What needle did you use in your Su carb?
Second, did you plumb in a new fitting for the vacuum advance line on the carb side of the butterfly valve. or did you just use the fitting that was there on the manifold side. or did you block off the fitting and the vacuum advance line.
I am unsure what to do . If you know of some one through this site that can help please let me know. I am from New Zealand so a phone call would be expensive.
Thanks
Title: help sj413 fitting su carb on friday
Post by: nero161 on June 01, 2006, 12:57:43: just used the needle that was in it. i think its a bdl. just joined everything up as normal ie vacume advance.