Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: MOTORSPORT_SAFETY on March 23, 2006, 22:03:30

Title: wheel options for 109
Post by: MOTORSPORT_SAFETY on March 23, 2006, 22:03:30

Hi All

at last project 109 has got underway and im thinking about the wheels I have a set of BF Edgetracs I think they are that are in decent nick that I got for about a tener a rubber so not a bad deal seeing I have 6 rims here with 6 different tyres all being well bellow the limit.

Before I decided on what to go for and get the tyres changed etc what options do I have wheel wise I know that if I had a 90 / 110 I would have lots to chose from but not sure were I stand with series studd patern

Thanks guys
Paul

Title: wheel options for 109
Post by: Jim-Willy on March 23, 2006, 23:47:48

series stud pattern is same as a 90/110 or disco 1 / rangey.  The only prob is a rostyle and a few others wont fit as the centre hole is too small.

Title: wheel options for 109
Post by: MOTORSPORT_SAFETY on March 24, 2006, 19:52:02

Hi Jim

Thanks for that mate reason I ask is I know a few guys that are selling some nice looking rims or a 90 and 110 down at the garage guess ill nip out and mesure the center hole in the morning and go armed with a tape so I can doulbe check.

Thanks guys


p.s still need bonnet hinges for 109 8)

Title: wheel options for 109
Post by: Jim-Willy on March 24, 2006, 20:04:50

Oh, alloys don't fit either, the hole in the centre is too small but even milled out they dont go on due to the brakes......  Forgot to say :)

Title: wheel options for 109
Post by: Brains on March 24, 2006, 20:24:32

Normal disco steel rims fit! just got a set on my series 2! :D

Title: wheel options for 109
Post by: Jim-Willy on March 24, 2006, 20:25:28

Quote from: "Landymad"

Normal disco steel rims fit! just got a set on my series 2! :D

Aye, they look the dogs on a series IMHO 8)

Title: wheel options for 109
Post by: bezzabsa on March 24, 2006, 20:43:38

Quote from: "jim-willy"

series stud pattern is same as a 90/110 or disco 1 / rangey.  The only prob is a rostyle and a few others wont fit as the centre hole is too small.

thought they fitted as long as you (a)- didnt have free wheeling hubs and (b)- didnt fit the hub covers!!

Title: wheel options for 109
Post by: MOTORSPORT_SAFETY on March 24, 2006, 21:10:41

[!Expletive Deleted!] theres goes that idea of the nice shiny alloys then

Ok got free wheeling hubs on the axel I was going to use but seing I have another axel without guess that will be getting used or I will try and get hold of a set of hubs and change them no worries there

So steel wheels of disco hmmmm will have a gander down the garage and see who has what there forever changing wheels flogging bits its a good source of stuff most of the time.

Thanks for all the help guys just need help on the paint now  :)


Paul




Project 109 Animal ~ in the stages of developing