Mud-club

Vehicle & Technical => Range Rover => Topic started by: blackbob on March 05, 2006, 20:01:26

Title: fan stat rr
Post by: blackbob on March 05, 2006, 20:01:26

:D has anyone fitted a fan stat to a range rover radiator in the top where the filler plug goes and if so what type or what is the thread size
think its bsp dut not sure
want to fit electric fan to rr

Title: fan stat rr
Post by: Range Rover Blues on March 05, 2006, 20:57:23

Wizard sell one suitable for what you want, or I used one from Merlin Motorsport.  You can adjust the switch-on temp by moving the probe accross the radiator fromthe hot side tot he cold (it clips between the vanes, ie it's a dry fit).

One some cars you can also find a switch fitted tot eh thermostat elbow, our first engine had one (may be a SD1 part).

Title: fan stat rr
Post by: FITZ4X4 on March 08, 2006, 12:23:41

[quote="One some cars you can also find a switch fitted tot eh thermostat elbow, our first engine had one (may be a SD1 part).[/quote]

All Classic Range Rovers with Air Con have a temperature sensor fitted to the thermostat housing. The sensor swiches the twin AC fans in front of the rad.