Mud-club
Vehicle & Technical => Defender => Topic started by: Matt_H on February 07, 2006, 20:35:08
-
ok I'm puzzled, how do you change one?
I've got the centre twin jet thing which has broken and needs relpacing. It looks like it's behind the dash - surely I don't have to remove that.
Any advice gratefully received!
Matthew
-
Fit new ones on the arms loadsa wash
universal fitting, done them on rangy, disco and series
Tap into pipe and run out some new tube up the arms away you go, 3 jets per unit
-
what jets did you use on the wipers? Is this a halfords special or something?
I've got some fan ones somewhere in a box I could mount them to the roll cage!
M
-
take the ashtray out the dash & the jet is behind there,
if not remove the dash top & access it that way
-
well it looked directly behind the ash tray but I thought I'd better ask.. last attempt to remove dash and I gave up - no diea how to remove the dash 'top' as it were - are there obvious screws? The liner part looked like it had press in plastic clips or something easy like that.
I'll try the ash tray tomorrow in the light :-)
THANKS!
Matthew
-
The washers are done by vehicle wiring products, pipe splitters and tubing you can purchase locally.
-
i've got to put an order in with them soon anyway :-)
do they do LED ones :P
-
what are the washers listed under? i cant seem to find them on the site :?
-
Matt
let me know what you are after and I can get them friday for you, they are only 15mins away fom me
-
Leo, towards bottom of page:
http://www.vehicle-wiring-products.co.uk/VWPweb2000/horns/horns.html
Although i got mine from local car shop, for £2.99
Debbie
-
thanks for that :wink:
-
here ya go
http://www.landrovernet.com/forum/showthread.php?t=46811
8)