Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: josh 109 on November 18, 2005, 22:35:28

Title: wheels for series
Post by: josh 109 on November 18, 2005, 22:35:28

might sound like a daft question but is their a modification that i could do to fit alloys to my series 3  :lol:  :lol:
                                     thanks josh

Title: wheels for series
Post by: James.Harwood on November 19, 2005, 08:36:29

Why!!

Expesive to repair, oops replace, once damaged off road.

Title: wheels for series
Post by: Miniman on November 19, 2005, 10:37:42

if my memory serves me right you can fit wheel spacers and they will fit but you will lose some stering lock. not good for a series. dont forget to adjust the steering lock bolts to stop it scrubbing on the chassis. You could fit 90 axels but alot of modification is needed and welding.

Title: wheels for series
Post by: josh 109 on November 19, 2005, 17:28:28

thanks for replies think i will stick to my white 8 spokes
                                           josh

Title: wheels for series
Post by: ian_s on November 21, 2005, 11:24:18

i have alloys that fit my series 3, with no modification needed
they have a nice large offset, too, brings the tyres right out to the edge of the bodywork.
once i get decent tyres on them i'll post some piccies

Title: wheels for series
Post by: josh 109 on November 23, 2005, 17:45:11

cool have you got a pic of the alloys you have ?
                        thanks josh

Title: wheels for series
Post by: Jake on November 23, 2005, 18:52:42

Modulars look cool or a set of Mach 5's
 :D

Title: wheels for series
Post by: ian_s on November 24, 2005, 12:20:19

i can get you a pic, but i have never seen them before or since
and i stole them off my brother :)

http://members.mud-club.com/profiles/ian_s/gallery/my_series_3/0/660085e9d3fdcfb4a45094d4fab169f2.jpg/