Mud-club

Vehicle & Technical => Defender => Topic started by: Xtremeteam on October 25, 2005, 18:38:06

Title: Need help for a change
Post by: Xtremeteam on October 25, 2005, 18:38:06

Right,decided to get a proper temp guage to fit to my 90 but i dont know what thread the disco sender is so i can get an adapter to fit the new sender for the guage,anyone know or got one handy

Title: Need help for a change
Post by: hingmy on October 25, 2005, 18:45:24

not this problem again! ;)

I'm up the road finishing the hybrid so will have a mooch at the w/e.

Title: Need help for a change
Post by: hobbit on October 25, 2005, 19:08:14

Dunno about defender but on the rad of a disco tdi, there is a plug, when I was having problems with overheating, i fitted a mechanical temp guage, and found I could fit the sender in this hole and tighten down on the thread

When i changed the rad, the flamin thread in the hole changed too, couldn't refit it the guage, yet :?

Title: sender
Post by: timberdog on October 25, 2005, 22:17:52

for some reason mine seems o read right on my converstion 200 tdi into 90???

no probs with heat so far touch wood

also :http://www.modworld.1st-hosting.co.uk/catalog/product_info.php?cPath=24_560&products_id=2748&osCsid=f021c98cd3884c2040b3a28dc5284125

Title: Need help for a change
Post by: landyman Ash on October 26, 2005, 10:39:20

Mikee I took mine to a lacal pulmbers suplier

They found one but a little loose for 25p

Used loads of PTFE tape and it sealed a treat!

Im working on the hybrid on Sunday, I'll see if it states what size adapter it is.

All I did was take the old sender, the new sender and the plumber guys did the rest  :wink: