Mud-club
Vehicle & Technical => Discovery => Topic started by: Oddjob on September 27, 2005, 20:19:52
-
:?: Hi i am not sure what i have broke!.... my disco will not drive in gear unless i actuate the difflock, i can turn the front prop whilst it is in gear and standing still but not the rear so at least i have narrowed it down to that!..i have dropped out the diff and cant see any damage and the diff side of the driveshafts seem intact....any ideas and what is the best way to check these items for wear/breakage?... :?
-
it might be your cv joints its worth a check, when out of difflock and in gear can you hear any grinding coming from any of the front corners :?:
-
I take it that it's the FRONT diff you removed for checking?
Check the halfshafts and the splines within the diff for damage - one vehicle had no apparent damage to a rear diff a couple of months ago, but the splines had worn too much for the drive to be positive ...
The other possibility is a blown CV joint - check that the half shafts (now that you've removed the diff, this is easy) are solidly attached to the hub drive members.
-
i would guess at cv joints gone if you lost drive like that but its not unknown for the splines in the diff to wear out
-
As others have said, it'll be the diff, a half shaft, or a CV joint.
-
its not unknown for the splines in the diff to wear out
That's exactly what happened to mine! See this post (http://forums.mud-club.com/viewtopic.php?t=9790) for the full story :)
-
its not unknown for the splines in the diff to wear out
That's exactly what happened to mine! See this post (http://forums.mud-club.com/viewtopic.php?t=9790) for the full story :)
:lol: it was yours i was referring to gordon :wink:
-
So was I!!! :lol: :lol:
-
Cheers after lengthy reading and research it appears to point towards the cv's i will keep you informed when i get a chance to check on thursday!!
-
Thursday????? and i thought you were busy??? :lol: :lol: :lol: Odd job like it :P :P wait till they see you :lol: :lol: :lol:
-
Who is this "Fingers Mclean"??? :shock: Is that a friday night hobby? :lol: Lucky i know someone with the spares i need eh? :P :D :D
-
:lol: :lol: YES BUD!!! YOU DO :wink: Dont forget mine before sunday Bud :wink: :wink: :wink: :P
-
Hi all thanks for your help, turns out to be N/S CV shaft turns but hub doesnt!! lots of rattling around!! new one being fitted tomorow, see what i can break next!! :shock: :shock:
-
Hi all thanks for your help, turns out to be N/S CV shaft turns but hub doesnt!! lots of rattling around!! new one being fitted tomorow, see what i can break next!! :shock: :shock:
The other side? :wink:
-
:x Dont Temp fate!! lol!! :lol: :lol: :lol: