Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: RandyLandy on July 24, 2005, 03:59:36
-
Went out yesterday to get some parts with my dad, whilst in Paddock's I decided my S3 would benefit from some new plugs and leads. Went out today took the leads off and in process the connector that goes on to the distributor got stuck in it so off i trundled off up to the shed with dizzy cap in hand got offending connector off and when i got back to the engine realized that i hadn't made any reference to the order of the plugs, i know that the sequence is 1, 3, 4, 2 but forgot what positions they are on the cap, any help would be greatly appreciated
-
here ya go
Connection for No 1 is the point on the distributor which point towards no 1 plug basically, thats the way I normally remember.
Although on the last engine swap, had to look in the book, the distributor was that far out nothing matched up
-
Btw, hope you enjoy working in the rain, just stepped out to take the pic and its drizzling here, supposed to be fitting the rear chassis member, another half done job again, ah well looks like I may go out for a wander instead, Bout time I got out more