Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: blackbob on February 04, 2006, 20:59:58

Title: raised air intake
Post by: blackbob on February 04, 2006, 20:59:58
:D for a cheep air intake a series L/R a standard drain pipe is the same size as the air hose and also fits over the oil bath outlet i had a truckcab with a roll bar which i mounted the air cleaner and ran a lenth of pipe over the roof down the screen and cut a hole in the top of the offside wing fitting a 90 deg bend at the wing a 45deg at the roof then 2x 90deg to the filter the whole thin was less than a tenner and it worked well
Shane the crank seals wernt water tight :(
SimplePortal 2.3.5 © 2008-2012, SimplePortal