Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: diff-breaker on October 12, 2005, 18:01:10
-
Anyone know why the oil pressure light comes on when braking fairly hard and Series drifts to one side ? :roll:
-
Usually oil slopping round in the sump, if its a bit down this can happen, may still be on the stick but is a good reminder to top up though
-
cheers fella for the prompt reply - i checked the oil level and thought it wa sok but will give it some for for safety's sake and let you know how i get on.
-
If i recall is there not two different length dipsticks on series engines, came across it once where someone put the wrong stick in the wrong vehicle
-
if your oil level is right your oil pressure light will still come on, i read it in the series 3 handbook. Your brakes are drifting to one side beacause they either need adjusting or your wheel cylinders are leaking and brake fluid has gone all over the shoes- this happens when you leave all the mud in your brakes after off roading in muddy puddles, has happened to me twice and it is a real [!Expletive Deleted!] putting new wheel cylinders on especially if your brakes lines are siezed onto the nut!!!