Mud-club

Vehicle & Technical => Discovery => Topic started by: Northmead on November 09, 2007, 22:08:35

Title: Brake Problems 300Tdi
Post by: Northmead on November 09, 2007, 22:08:35
Hi All

Can anyone help , i have a problem with my brakes on my
1994 L Reg 300 Tdi . I have brake fluid going to the front brakes but nothing going to the rear brakes does anyone know the part number for the brake
pressure deducing valve that sits on the near side wing under the water bottle. Where all five brake lines fit into, as this may be faulty.


Regards

Brian

 :?:  :(
Title: Brake Problems 300Tdi
Post by: piper5 on November 10, 2007, 09:26:07
i think you are looking for   anr3194  two pipes to servo one to each side at front and one pipe to the rear--5 pipes?   have you checked the rear hose hasn't collapsed seen this before?
Title: bad breaks
Post by: lurch_917 on November 14, 2007, 18:27:32
before you go to the expence of buying a new equaliser valve check the piping starting at the rear axel as this some times collapses or the piping gets dinged wile off roading
SimplePortal 2.3.5 © 2008-2012, SimplePortal