Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: webby on March 02, 2007, 23:03:34

Title: WHAT CLUTCH DO I NEED ?
Post by: webby on March 02, 2007, 23:03:34

i have just got a milner v8 conversion kit for my 69 2a, does anyone know what clutch i will need, i will be using the standard rover fly wheel and standard 2a gear box, any help will be very gratefully recieved, cheers.

Title: WHAT CLUTCH DO I NEED ?
Post by: Leslie Henson on March 03, 2007, 05:59:01

If the flywheel and gearbox are from a 2A, then you need a 2A clutch kit.


Les.

Title: WHAT CLUTCH DO I NEED ?
Post by: webby on March 03, 2007, 06:11:10

the flywheel is the V8 original.

Title: WHAT CLUTCH DO I NEED ?
Post by: trustyrusty on March 03, 2007, 18:46:16

you would need a 2a pressure plate , but the fly wheel may have 3 dowls on so you need to drill a hole in your plate.

Title: WHAT CLUTCH DO I NEED ?
Post by: Leslie Henson on March 03, 2007, 19:47:55

Clutch cover to match the flywheel, and plate to match the gearbox is usual. This depends if the clutch plate sits in the right position with regard to the contact area of the V8 cover, and operates correctly. If not, then a 2a clutch cover will have to be used. This may involve engineering work to the flywheel.


Les.