Mud-club
Vehicle & Technical => Jeep => Topic started by: El Hair on February 24, 2009, 09:35:51
-
At the risk of asking a stupid question, or just being completely naïve, according to the Owner’s Manual, 4LO is engaged as follows:
Slow the vehicle to 3-5 km/h (2-3 mph), shift the transmission into Neutral (N), then shift the transfer case lever firmly and quickly to Lo without pausing…”
Is it really required to do this whilst moving, or is it just as feasible to do it whilst stationary? Would I damage the transfer case whilst doing this stationary? I now what the manual says, but are Jeep erring on the side of caution?
-
Stop said Jeep put in neutral and shift to 4wd low...whilst stationary...
-
Ya see, that's what I've mostly been doing. I was just curious if I was doing anything wrong. :undecided: :huh:
Looks like I'll carry on like this then. :D