Mud-club
Vehicle & Technical => Nissan => Topic started by: ivor patrol on March 27, 2008, 20:06:38
-
Hi, I'm new to the forum hello to one and all
i have just brought a 1993 Diesel 4.2 patrol GR SLX safari ,and the tappets are a like noisey i have ordered a workshop manual but it has'nt turned up yet.
I was just wondering if anyone would have the valve clearances to hand ??
thanks in advance
Ivor
-
hi and welcome mate,
valve clearances, stem to guide?
inlet: 0.023 to 0.053mm
exhaust: 0.04 to 0.07mm
hope that helps?
-
hi and welcome mate,
valve clearances, stem to guide?
inlet: 0.023 to 0.053mm
exhaust: 0.04 to 0.07mm
hope that helps?
Remember that with some of the Nissan Diesel engines that they are Chain drive and this tends to rattle some times.
-
no chains on patrol engines, well not ones i've dealt with anyway.
The TD42 in question here is gear driven,
the RB30 petrol and my 2.8 TD are belt driven,
not sure on the ZD30? :undecided:
-
no chains on patrol engines, well not ones i've dealt with anyway.
The TD42 in question here is gear driven,
the RB30 petrol and my 2.8 TD are belt driven,
not sure on the ZD30? :undecided:
Yep i think you are right, i have been digging and its the 2.7 TDI's that are chain drive.
-
another update, think this is what you wanted
valve clearance ( when hot)
0.35mm