Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: bezzabsa on March 14, 2006, 15:01:18

Title: 90 doors on series
Post by: bezzabsa on March 14, 2006, 15:01:18

just wondering how hard it is to change to door striker plate over to the anti burst jobbie? do i need to drill anymore holes or does it just slot in where the series ones went?
cheers

Title: 90 doors on series
Post by: dew1911 on March 14, 2006, 15:49:36

Well this months LRW shows you how to fit Series doors to a 90, so I presume they work in reverse. didn't have to drill anything either.

Title: 90 doors on series
Post by: Bob696 on March 14, 2006, 16:43:33

got series doors on my 90

Title: 90 doors on series
Post by: Xtremeteam on March 14, 2006, 16:48:08

fitting series doors on my 90

Title: 90 doors on series
Post by: Neil Jones on March 14, 2006, 17:03:58

Got 90 doors on my series. Cant remember fully, but we did have to do some drilling.

Title: 90 doors on series
Post by: bezzabsa on March 14, 2006, 17:22:34

cheers for the quick replies, should have worded it a little better.. i am swapping the 90 doors over to my series and series to the 90..90 has the anti burst locks, series has the old door latch type..

Title: 90 doors on series
Post by: Xtremeteam on March 14, 2006, 17:41:26

in which case u ned to drill 2 new holes on the series i think to make them fit as they are ush button off the 90

Title: 90 doors on series
Post by: hobbit on March 14, 2006, 17:53:56

Got defender tops on series bottoms :wink:  :?

Title: 90 doors on series
Post by: bezzabsa on March 14, 2006, 18:01:45

trying to get a less drafty series...not i said LESS drafty rather than draft free..plus i have 90 doors sat on my 90...which is sat next to my series..soooooooo....
 :lol:

Title: 90 doors on series
Post by: Reaper on March 14, 2006, 19:58:34

I got 90 doors on my series, you have to drill a couple of holes but nothing major! makes a big difference to the draught and cold problem.
It was great fun when I first insured it, the woman on the phone did'nt know what to say when I told her it had "90 doors" :lol:

Title: 90 doors on series
Post by: bezzabsa on March 14, 2006, 20:14:12

dont suppose anyone has pics of what has to be drilled???
and those doors look a damn sight better than the ones im fitting, then again going to be matt black so not a problem ;)

Title: 90 doors on series
Post by: bezzabsa on March 15, 2006, 19:33:16

had a quick once over today, looks as though its just a case of measuring up the door striker plate and re drilling in the correct place, think the series ones are slightly lower.....

Title: 90 doors on series
Post by: bezzabsa on March 17, 2006, 15:01:42

well, if its dry tomorrow, and my backs up to it i may well 'dryfit' one of the doors and see what problems i come across..may well have a good look at the screen as well see if something can be fabricated to move it on to the series..

Title: 90 doors on series
Post by: bezzabsa on March 31, 2006, 18:24:35

well started doing it.. heres link to thread
http://forums.mud-club.com/viewtopic.php?p=210666#210666
(started new thred.. then remembered this one!!)