Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: Doodlebug on February 16, 2006, 21:12:48
-
Just fitted new springs on a S2a 88", anyone know the torque wrench setting for the u-bolt nuts & the shackle bolts & nuts.
The poxy Haynes manual's about as much use as a chocolate fireguard.
-
IMHO tight,
the shackle bolts are 3 foot bar tight & ubolts are 18incg ratchet tight :lol:
-
U Bolt = 58lb ft
Shackle Bolt = 60 to 70 lb ft
According to Green Bible
I'd be inclined to go with Mr Redlines method :wink: :D
-
U Bolt = 58lb ft
Shackle Bolt = 60 to 70 lb ft
According to Green Bible
I'd be inclined to go with Mr Redlines method :wink: :D
thank you,did a series 3 last week & fitted para's to it,4 ft bar was the tool of choice to set the tightness