Mud-club

Vehicle & Technical => Range Rover => Topic started by: chris9119 on September 11, 2006, 06:19:00

Title: Tigger Finished
Post by: chris9119 on September 11, 2006, 06:19:00

Other than wiring the spots, etc, tigger is ready for MOT

Chris

Title: Tigger Finished
Post by: barmiebrumie on September 11, 2006, 08:10:39

Chris,
         Very very nice, but them wheels would look better on mine :wink: ,



John.

Title: Tigger Finished
Post by: ChrisW on September 11, 2006, 08:52:08

Woohooo!

(Missed a bit  :lol: )

Title: Tigger Finished
Post by: denviks on September 11, 2006, 09:22:05

now that is very nice.................. well done  :D  :D  :D  :D

Title: Tigger Finished
Post by: chris9119 on September 11, 2006, 09:48:55

Quote from: "barmiebrumie"

Chris, Very very nice, but them wheels would look better on mine :wink: , John.

John, they may well end up there........., I think they may rub......., looks like I need a two inch+ body lift now.

Chris

Title: Tigger Finished
Post by: Star on September 11, 2006, 09:52:48

The wonderful thing about Tigger Is Tiggers are wonderful things!

Very nice  :)  :)

Title: Tigger Finished
Post by: barmiebrumie on September 11, 2006, 10:16:18

Quote from: "chris9119"

Quote from: "barmiebrumie"

Chris, Very very nice, but them wheels would look better on mine :wink: , John.

John, they may well end up there........., I think they may rub......., looks like I need a two inch+ body lift now.

Chris

We may need to have a chat later then :wink: ,

ps:- any stickers going  :wink:

Title: Tigger Finished
Post by: chris9119 on September 11, 2006, 10:35:01

yes there will be stickers....., tigger ones, along with some large D44 ones, etc, etc, etc. :lol:

Title: Tigger Finished
Post by: andygod on September 11, 2006, 10:44:41

Looking good Chris \:D/
Are you bringing tigger tonight?  =D>  =D>

Title: Tigger Finished
Post by: p4203 on September 11, 2006, 13:02:18

very nice who's arches did you use ?awsome rrc well done for keeping another 2 door alive :D

Title: Tigger Finished
Post by: ChrisW on September 11, 2006, 13:10:46

Quote from: "p4203"

well done for keeping another 2 door alive :D

It's a bobbed 5 door  :wink:  :oops:

Title: Tigger Finished
Post by: barmiebrumie on September 11, 2006, 15:06:05

Quote from: "andygod"

Looking good Chris \:D/
Are you bringing tigger tonight?  =D>  =D>

What & get it wet & dirty :(biglaugh):  :wink:



John.

Title: Tigger Finished
Post by: p4203 on September 11, 2006, 22:06:42

ooops :oops:  :oops:  :oops:  :oops:
 my mistake just shows how nice a job it is :D

Title: Tigger Finished
Post by: Range Rover Blues on September 12, 2006, 11:56:47

Quote from: "LittleStar"

The wonderful thing about Tigger Is Tiggers are wonderful things!

Bouncy, Bouncy Boucy Bouncy, tiggers are lots of fun :D

Title: Tigger Finished
Post by: Littledan on September 12, 2006, 13:06:00

very nice chris :D

i was going to say looks like she need abit more heigh

dan

Title: Tigger Finished
Post by: Littledan on September 12, 2006, 13:08:29

got any other pics chris?

dan

Title: Tigger Finished
Post by: craig on September 12, 2006, 13:53:58

That looks fantastic Chris, i bet you cant wait to use it !!!

   Craig & Tracy \:D/

Title: Tigger Finished
Post by: chris9119 on September 12, 2006, 14:26:16

Quote from: "Littledan"

very nice chris :D

i was going to say looks like she need abit more heigh

dan

thanks Dan, was thinking the same, probably will do 2 or 3 inch body lift

Chris

Title: Tigger Finished
Post by: wing nut on September 12, 2006, 15:53:12

its come a long way chris  :wink: and looks great  :lol:  so you taking it to l2b or big boy? ....

Title: Tigger Finished
Post by: chris9119 on September 12, 2006, 16:31:28

Quote from: "wing nut"

its come a long way chris  :wink: and looks great  :lol:  so you taking it to l2b or big boy? ....

L2B will probably be BB as Paul and Lin are coming with us (mitsi's not allowed, and the gods full up).

If they pull out, then tigger could be going to the seaside :lol:

Title: Tigger Finished
Post by: wing nut on September 12, 2006, 17:11:43

Quote from: "chris9119"

Quote from: "wing nut"

its come a long way chris  :wink: and looks great  :lol:  so you taking it to l2b or big boy? ....

L2B will probably be BB as Paul and Lin are coming with us (mitsi's not allowed, and the gods full up).

If they pull out, then tigger could be going to the seaside :lol:

it will look nice by the sea :lol:  :lol:

  by the way ive got your fireworks ,im just waiting for the rockets :wink:

Title: Tigger Finished
Post by: zulublue on September 12, 2006, 20:56:19

That is mint, no not the colour, the RR.

Very nice job, want to start on mine LOL

Title: Tigger Finished
Post by: redneck on September 12, 2006, 21:30:04

Very smart, I like that a lot  8)  8)  8)

Title: Tigger Finished
Post by: Littledan on September 13, 2006, 11:19:34

2/3 inch body lift would look awesome :D

dan

Title: Tigger Finished
Post by: chris9119 on September 13, 2006, 20:55:24

More pictures added to my photos (pages 3 & 4): http://members.mud-club.com/profiles/chris9119/gallery/RangeRover/0

Chris

Title: Tigger Finished
Post by: redneck on September 13, 2006, 21:31:27

I've just looked through your other pictures chris, really nice job  8)  8)  8)
Is that  an old air compressor tank you've addapted for a fuel tank  :?:  damn fine idea that  :idea:

Title: Tigger Finished
Post by: chris9119 on September 13, 2006, 22:30:32

redneck

yes, in deed it is, 90ltrs

Chris

Title: Tigger Finished
Post by: Littledan on September 14, 2006, 22:40:35

looks good chris cant wait to see her out in action :D

Title: Tigger Finished
Post by: redneck on September 15, 2006, 15:56:27

Quote from: "Littledan"

looks good chris cant wait to see her out in action :D

Seems a shame to get it muddy now it looks so good  8)

Title: Tigger Finished
Post by: Jake on September 15, 2006, 23:32:01

Good work Chris
Looks great!!
 8)

Title: Tigger Finished
Post by: Littledan on September 16, 2006, 12:58:20

Quote from: "redneck"

Quote from: "Littledan"

looks good chris cant wait to see her out in action :D

Seems a shame to get it muddy now it looks so good  8)

it would look better with mud on aye guys?  :wink:

Title: Tigger Finished
Post by: wing nut on September 17, 2006, 21:16:54

so is tigger coming to london then chris :wink:  :lol:

Title: Tigger Finished
Post by: andygod on September 18, 2006, 10:20:24

If you do bring Tigger to London we could take turns in towing a petrol tanker :lol:  :lol:

Title: Tigger Finished
Post by: barmiebrumie on September 18, 2006, 10:22:49

There's room in the back for at least 10 jerry can's :(kerching):  :(biglaugh): ,




John.

Title: Tigger Finished
Post by: andygod on September 18, 2006, 11:37:30

Quote from: "barmiebrumie"

There's room in the back for at least 10 jerry can's :(kerching):  :(biglaugh): ,




John.

 :(biggrin): That should cover about half of the journey down :(biggrin):

Title: Tigger Finished
Post by: LANDYTIM on September 18, 2006, 11:49:43

Anybody else really really jealous?!?

Looks quality, how long did the project take?

Title: Tigger Finished
Post by: barmiebrumie on September 18, 2006, 13:01:44

Nobody on here's jealous at all  :^o  :^o  :^o  :(biglaugh):



John.

Title: Tigger Finished
Post by: chris9119 on September 18, 2006, 22:40:24

Quote from: "LANDYTIM"

Anybody else really really jealous?!?

Looks quality, how long did the project take?

About six-months, on and off

Chris

Title: Tigger Finished
Post by: chris9119 on September 18, 2006, 22:44:51

Quote from: "Littledan"

2/3 inch body lift would look awesome :D

dan

Having checked out the body lift height, found a minor problem :cry:  :cry:

The gap under the lowest part of the roll cage is 1/4". Therefore, to do a 2/3" body lift, I'm going to have to lengthen the six main roll cage supports :oops:  :oops:

Thats to much ag, so i'm not going to lift it,.........., just cut/change the arches if required :roll:

Chris

Title: Tigger Finished
Post by: Littledan on September 18, 2006, 23:21:42

Quote from: "chris9119"

Quote from: "Littledan"

2/3 inch body lift would look awesome :D

dan

Having checked out the body lift height, found a minor problem :cry:  :cry:

The gap under the lowest part of the roll cage is 1/4". Therefore, to do a 2/3" body lift, I'm going to have to lengthen the six main roll cage supports :oops:  :oops:

Thats to much ag, so i'm not going to lift it,.........., just cut/change the arches if required :roll:

Chris

ouch not good  :(

but what ever u do im sure it will still look the dogs mate :D

your motors always dose :D

dan

Title: Tigger Finished
Post by: LANDYTIM on September 19, 2006, 08:00:02

Quote from: "chris9119"

Quote from: "LANDYTIM"

Anybody else really really jealous?!?

Looks quality, how long did the project take?

About six-months, on and off

Chris

Thats not a bad time scale at all for such a good result!!

Title: Tigger Finished
Post by: Sooty on September 20, 2006, 16:22:22

Its no good I have waited long enough, I have got to do it my self.

Quote from: "LittleStar"

The wonderful thing about Tigger Is Tiggers are wonderful things!

The wonderful thing about Tigger Is Tiggers are wonderful things!
Their tyres are made out of rubber their suspension made out of springs.
Their loud and bouncy, proud and flouncy fun fun fun fun fun.
The wonderful thing about Tigger Is that this is the only one.
Sticker required Chris????
Not sure Muddyweb would make it as Tigger 1 is still being rebuilt so it is a little untrue.

Title: Tigger Finished
Post by: chris9119 on September 20, 2006, 22:14:18

Quote from: "Sooty"

Its no good I have waited long enough, I have got to do it my self.

Quote from: "LittleStar"

The wonderful thing about Tigger Is Tiggers are wonderful things!

The wonderful thing about Tigger Is Tiggers are wonderful things!
Their tyres are made out of rubber their suspension made out of springs.
Their loud and bouncy, proud and flouncy fun fun fun fun fun.
The wonderful thing about Tigger Is that this is the only one.
Sticker required Chris????
Not sure Muddyweb would make it as Tigger 1 is still being rebuilt so it is a little untrue.

I thought that tigger 1 had been decommissioned :!:  :!:

Chris