Mud-club
Vehicle & Technical => Jeep => Topic started by: El Hair on March 13, 2009, 23:02:40
-
Okay, whilst looking over the WJ it occurred to me that I have no tow rings, but do have a removable hitch bracket. Surprised at this, I took a look at www.wjjeeps.com (http://www.wjjeeps.com) and discovered that this config was actually 'standard' if the tow bar was fitted. Pity really, as this now causes me recovery problems.
Attached are a couple of photos of the bracket. Markings are as follows:
A = 28mm
B = 220mm
C = 65mm
D = 95mm
Diameter of circular holes = 15mm
Now, I've managed to get hold of a jate ring to fit the rear-most pair of holes. So, hopefully this should prove beneficial. However, I now have a couple of questions:
1. Can I get a replacement tow hitch? If so, what am I looking for?
2. Is a jate ring going to suffice, or do I need something more?
3. Is there an easy (and cheap!) way to add front and back tow loops/hooks?
4. What bright spark thought that tow loops were an option?
Hopefully, getting stuck won't be a problem, but if I can recover some of our Green Badge friends it'll be worth the inconvenience. :D :D :D
-
Top of my head Id say shackles n bfo bolts???
-
for the front get underneath and have a look at the chassis there may be 2 threaded holes on both legs (there are on toyotas/isuzus) ? if there are hooks with the bolts included can be brought for about £12, sorry its abit vauge but may be worth a look
-
Top of my head Id say shackles n bfo bolts???
Pardon my stupidity, but what are "bfo bolts"?
-
Big F*** off ie large n solid... :lol:
-
Gotcha! :oops: