Mud-club
Vehicle & Technical => Mitsubishi => Topic started by: Evilgoat on February 14, 2007, 10:06:26
-
The Hoses for the rear AC unit on a LWB Mark 2
Regassed dad's to be treated 5 mins later with a big vapour cloud out of the rear driver's side wheel arch. Worn right through.
Failing that, anyone know where to get one?
-
This is a common fault mate and hence the pipes are like rocking horse poo, This happened tom my MK2 paj and i found that mitsi want about £115 for the pipe :shock: i tried for ages to get a second hand bipe bit in the end i used some of that plastic metal stuff, if you build it up in 2 of 3 layers and cut a slightly larger pice of thube length ways and sandwich it over the offending pipe it will hold.
I know its a bit of a bodge but it meens the aircon stays working .
-
This is a common fault mate and hence the pipes are like rocking horse poo, This happened tom my MK2 paj and i found that mitsi want about £115 for the pipe :shock: i tried for ages to get a second hand bipe bit in the end i used some of that plastic metal stuff, if you build it up in 2 of 3 layers and cut a slightly larger pice of thube length ways and sandwich it over the offending pipe it will hold.
I know its a bit of a bodge but it meens the aircon stays working .
thats what we were thinking. Have one last port of call. An uncle works for Hussman so might be able to get something made.
-
you can have one made but they will have to use your exsisting fittings as the fittings mitsi use are not a common type used in refridgeration, this option was going to cost me £75