Mud-club

Vehicle & Technical => Suzuki => Topic started by: baz2236 on June 04, 2007, 21:23:37

Title: Rear Disc coversion HELP
Post by: baz2236 on June 04, 2007, 21:23:37

Hi a little while ago i did a rear disc coversion on me SJ I am just about to do a caliper repair kit and when looked at my pads i saw they are not wearing evenly at all. Please see pics.

Can anyone tell me what i have done to course this affect ad how i can stop it.

When i did the rear disc i did have to space the caliper mount out if that caliper mount is not level could this be the course.

Title: Rear Disc coversion HELP
Post by: generation-x on June 04, 2007, 21:28:11

baz
lookin @ ur pix i'd say ur calipers are not square to ur disc cud be ur caliper mount not seating right on ur axle

ur need to get a square and have a look

simon

Title: Rear Disc coversion HELP
Post by: rollazuki on June 04, 2007, 22:39:58

Err yup, the caliper mount is twisted.

Did you weld it on, or mount it onto the axle end flange??

Is the mount thick enough, has it twisted?

Title: Rear Disc coversion HELP
Post by: buckshot on June 06, 2007, 20:55:46

hi baz,i had the same problem but not so severe.my remedy was to shim between the mounting bracket and pad carrier with thin washers until the pads ran true to the disc.