Mud-club
Vehicle & Technical => Range Rover => Topic started by: Range Rover Blues on February 28, 2007, 13:33:54
-
Ok, not my field of expertise so I need some advice. How do you check that a 300TDi has had the cambelt upgrade thingy done, preferably without spending 3 hours getting filthy?
-
All I know is that the tensioner on a standard 300tdi is out of alinement to the other pulleys which the cam belt runs on .and the mod is to realign the pulleys with a modifiaction done to the tensioner, I undertstand that all tensioners for a 300tdi have had the mod embodied.
So just have look if you can at the cam belt and if it is inline I would say it has been done.
hope this helps