Mud-club

Vehicle & Technical => Range Rover => Topic started by: generation-x on October 05, 2010, 16:25:05

Title: rrc rear shock drop brackets
Post by: generation-x on October 05, 2010, 16:25:05

hi guys lookin more for info and pix . Does anyone have these fitted? How do they bolt the original shock mount to the drop plates? I'm more than slightly confuzzled about how they mount. Simon

Title: Re: rrc rear shock drop brackets
Post by: hairyasswelder on October 05, 2010, 18:31:26

There are more than 1 type  :?

Mine are the 10mm plate type. They bolt to the chassis through the original holes and the shock mount bolts to them

Title: Re: rrc rear shock drop brackets
Post by: generation-x on October 05, 2010, 18:40:03

Quote from: hairyasswelder on October 05, 2010, 18:31:26

There are more than 1 type  :?

Mine are the 10mm plate type. They bolt to the chassis through the original holes and the shock mount bolts to them

many thanx for the pic m8y
do the hangers top mounts still go thru the chassis? and the bottm just throu the drop plate?

Simon

Title: Re: rrc rear shock drop brackets
Post by: hairyasswelder on October 05, 2010, 20:49:30

no. top mount bolts are fixed to plate and bottom bolts through...  hang on, pics easier  :-k

Black bolt heads are the original bolts through the chassis, the third is replaced by the csk allen bolt in the centre

Title: Re: rrc rear shock drop brackets
Post by: Jonny Boaterboy on October 07, 2010, 20:16:06

I have a diffrent type to the one shown, Mine you unbolt the old mount (3 bolts) and bolt on the new, which has the mounting welded on at what ever the decrease is i.e. minus 2  or 3 inch.

I have some that I don't need, I can bring them along on the 13th if you want?

Jonny

Title: Re: rrc rear shock drop brackets
Post by: generation-x on October 08, 2010, 14:28:37

jonny
your a star but cud i collect one eve next week as i have an event in couple of weeks
how much you looking for them?

si