Mud-club

Vehicle & Technical => Discovery => Topic started by: sub4x4 on February 26, 2004, 22:01:07

Title: 200 to 300 tdi
Post by: sub4x4 on February 26, 2004, 22:01:07

is it possable to change my head light and indecators on a 200 tdi to the ones on a 300 tdi with out changeing my wings as they look very similar

Title: 200 to 300 tdi
Post by: Bush Tucker Man on February 26, 2004, 22:17:53

In a word. Yes.

Simmonites (Thornton Road, Bradford) do a kit for this very purpose, they usually have an advert in 'LRO' each month.

It's in the magazine as;
"Update your 200 Disco to 300 style. New grill, Bumper mouldings,4 end-caps, headlights. DIY parts kit from........ £395"

http://www.simmonites.co.uk/

Title: 200 to 300 tdi
Post by: Andy. on February 26, 2004, 22:33:32

I looked into this but the cost put me off, way too much  :evil:

Instead went for brighter bulbs, and after all quite like the 200 series look, its old  :lol:

But went for the 300 rear bumper swap and all four end caps. Straight swap for all parts, nice and easy  :D

However if anyone want to put a 300 front valance (one with the front fogs in) onto a 200 you'll need to re-drill the front bumper as the lugs/pegs don't match up, but will do once drilled correctly, and looks fab  :D

Title: 200 to 300 tdi
Post by: Andy. on March 01, 2004, 21:18:59

There is an article in Aprils edition of LRO mag on just this subject  :idea: