Mud-club
Vehicle & Technical => Discovery => Topic started by: auf_wiedersehen_pet on June 28, 2008, 20:17:08
-
5 Way Breather Manifold - Done 2x Axles & 1x Other - What's Missing?
I've bought one of Wizard's Breather Manifolds. (http://cgi.ebay.co.uk/BREATHER-WADING-KIT-MANIFOLD-LAND-ROVER-4x4-SNORKLE_W0QQitemZ170172722046QQcmdZViewItem?_trksid=p3286.m20.l1116) Done the two axles and the unknown breather which comes out by the bulkhead (on the NS of the engine behind the turbo).
What is missing and where can I find the end of the existing breather?
:lol:
-
Does this help?
http://www.wizardbilt.com/Breathers%20to%20Manifold%20Connection.htm (http://www.wizardbilt.com/Breathers%20to%20Manifold%20Connection.htm)
-
Does this help?
http://www.wizardbilt.com/Breathers%20to%20Manifold%20Connection.htm (http://www.wizardbilt.com/Breathers%20to%20Manifold%20Connection.htm)
Thanks Ben. It's helped me to identify what the breather should connect to.
2 Axles done. 1 Unknown done (by bulkhead). 2 Missing.
:lol:
-
The one up against the bulkhead is either the gearbox or transfer box IIRC.
Other possibles - there's a breather on the back of the fuel injection pump, and one on the timing belt cover. There'll also be the other transmission one which is also supposed to be up behind the engine. I'm not sure which ones the kit is supposed to cover though!
-
Your 5 connections are
Front axle
Rear axle
transfer box
gearbox
timing cover (this one you have to drill a hole in) (carefully!! [-o<)
the other connection on the end takes a larger diameter pipe up the snorkel if you have one fitted.
-
Well done Nev spot on.
wizard :twisted:
-
wiz do you do a 6 port manifold
-
Well done Nev spot on.
wizard :twisted:
You'r getting us Scotsmen mixed up Wizard, this is Brian, Nevs the ugly one!! LOL
-
Sorry Brian my mistake. thats what happens when you meet several people all at once !!!!!And you are right Nev is a bit on the ugly side.
Mr biggerlandy, I dont have a 6 way manifold,but can knock one up if you want.
regards
wizard :twisted: