Mud-club
Vehicle & Technical => Defender => Topic started by: T30CDB on November 02, 2008, 12:55:03
-
Could somebody please explain how you change the bulb in one of these ? or do i have to disconnect it and remove it from the a bar . Any advice appreciated :)
-
Hammer anyone?
-
I think if I remember correctly you remove the screws from the outer ring remove the ring and pull out the lens
The bulb is held in with a spring clip
Should be enough cable in the light so you can change the bulb without removing the unit from your bar
Hope this helps
Rich
-
Cheers will give it a go in the day light :)
-
DON'T take the screws all the way they hold spring plates which clamp to the edgesof the bowl.