Mud-club
Vehicle & Technical => Jeep => Topic started by: MUDJ4MES on September 08, 2011, 20:40:20
-
Can anyone please how to change a sidelight bulb on 52 plate v8,other than removing whole front end
-
Open the hood, and using a 7mm socket remove the long headlamp jackscrew, 2nd from left. Grasp the headlight assembly on the upper inboard and lower outboard corners and wiggle and pull very firmly outward to disengage the 3 ball stud alignment posts from their sockets (be cautious of the sharp edges of the grille and fender areas surrounding the headlamp.
It does need a very stong pull but be careful it will come away quickly.
-
GC headlamp assemblies...so much er entertainment....
-
Take large hammer give it a serious wack and repeat 10 times I should of bought a Landy! :smiley: :evil:
-
Unlike Landys GCs dont have many rust issues... :grin:
-
Unlike Landys GCs dont have many rust issues... :grin:
mmmm you are joking ;) :lol:
My Grand Chokie does have underside rust , but no panel rust, unlike discos of the same age ;)