Mud-club
Vehicle & Technical => Jeep => Topic started by: henryandlesley on August 19, 2007, 22:23:18
-
hi has anyone done the bearing behind the rear prop on the axle as i think mine is making a noise
-
you will find two bearings on the pinion, the in bound is a strip down job, and the one you have asked about can be accessed from the prop yoke, but i personally have never done it so can't comment, chances are if one has gone so has the other.
*edit*
i have just looked at your signature, you have a 2.5 can you confirm the rear axle? i believe you have the chrysler 8.25 the information i have listed above is only relevant to the dana 35c.
peter henry
-
have a look here, it list's the rear axle options.
http://www.jeepiki.com/wiki/index.php/Main_Page
peter henry